Spektrum SPM2020 DX2 Manuel d'utilisateur télécharger pdf (Page 17)

The Data Reset function allows you to reset all the programming in the selected model (1 or

2) to the factory default settings. Before using the Data Reset function, it’s important to enter

the Model Select function and check to make sure the current model number indicated (1 or

2) is the model to which you want to reset to the factory default settings. The Model Select

function is described in detail on page 19.

Accessing the Data Reset Function

To access the Data Reset function, follow the steps below:

Press the MODE key to access the

Model Name Entry function

MODE CHANNEL

ENTER

SYSTEM

Press the INCREASE or DECREASE

keys at the same time to reset (clear)

all settings for the selected model to

the factory default

INCREASE DECREASE

CLEAR

DIRECT

+ –

1. Press the MODE and CHANNEL keys at the same time and hold.

2. Turn on the transmitter power switch to enter the System Mode.

3. Press the MODE key once until CLR appears on the screen.

4. Press the INCREASE and DECREASE keys at the same time to reset the data. To

conﬁrm that the selected model’s programming has been reset, a beep will sound and

the model number selected (1 or 2) will stop ﬂashing.

5. To exit the System Mode, either turn the transmitter power switch off or press the

MODE and CHANNEL keys at the same time.

Data Reset

(System Mode)

clr

Indicates model to be reset

–

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Pas de commentaire

Spektrum SPM2020 DX2 Manuel d'utilisateur Page 17