Spektrum DX3S Guide de l'utilisateur télécharger pdf (Page 18)

18 SPEKTRUM DX3S USER GUIDE

AUX SETTING

TheAuxiliarySettingfunctionallowstrimadjustments

ontheauxiliarychanneltobemadeandadjustmentsto

mixing values on the steering to the auxiliary channel.

Typically the mixing function is used in dual steering

servo applications such as giant-scale trucks. The

primary or controlling channel is steering while the

channel that is mixed to is auxiliary. The auxiliary

channel follows the movement of the steering channel

based upon the mixing value that is programmed.

Negative values cause the auxiliary to move in the

opposite direction. Note that the AX Trim is active for the

Auxiliary channel only. The auxiliary channel (Forward/

Reverse) two-position switch allows dual mixing rates

that expand capabilities to include crab steering as used

in rock crawling.

TO ACCESS THE AUX SETTING

In the List screen use the Rolling Selector to highlight

the AUX Setting function and press the Rolling Selector.

The AUX SET function screen will then appear (as

shown above).

Use the Rolling Selector to select the AX Trim function or

to select the Mix function.

With AX Trim selected, pressing the Rolling Selector will

cause the surrounding box to flash. Rotate the Rolling

Selectortoadjustthevalueanddirectionoftheauxiliary

channel trim.

With Mix selected, pressing the Rolling Selector will

cause the surrounding box to flash. Move the Rolling

Selector to enable the mix function then press the Rolling

Selector to select it.

With Mix Enabled, the following screen will be displayed.

F/R Disabled = (Forward/Reverse) 2-position switch

disabled

TrH = Travel High side

TrL = Travel Low side

Toadjustthetravelofthemixedauxiliarychannelin

relation to the steering input, rotate the Rolling Selector

and place a box around TrH/TrL percentages. Press the

Rolling Selector to enter the Auxiliary mix travel function.

RotatingtheRollingSelectorwillnowadjustboththe

Travel High and Travel Low values simultaneously.

Ifyoudesiretoadjustthehighorlowtravelvalues

independently, move the wheel and that value alone will

be highlighted (e.g. turning the steering wheel to the

right will highlight the low value only and subsequent

adjustmentwillaffecttherighttravelonly).Tohighlight

both values again after moving the wheel in one

direction, simply press the Rolling Selector twice with the

wheel centered and both values will be highlighted.

To return to the main screen press and hold the Rolling

Selector for more than three seconds.

Enabling F/R will allow use of the Forward/Reverse

2-position switch for dual steering rate mixes.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Spektrum DX3S Guide de l'utilisateur Page 18

Commentaires sur ces manuels