Spektrum SPMVR6007 Manuel d'utilisateur télécharger pdf (Page 3)

Spektrum VR60071

The VR6007 is designed for high-current draw applications, like giant-scale airplanes with multiple high-current draw servos. Spektrum’s

model VR6007 6-volt 7.5-amp regulator allows you to power your onboard radio system with either 2-cell lithium or 5- to 8-cell NiCd and

NiMH receiver packs. A single VR6007 regulator provides 7.5-amps continuous current (11 amp peak) making it ideal for most high-current

draw applications. For heavy-duty applications you can use two VR6007s to provide 15-amp continuous and up to 22-amp peak power. The

VR6007 is ideal for use with Spektrum’s AR9100 PowerSafe

™

receiver and comes pre-wired with EC3

™

connectors.

Applications

Features

Specifications

Type - 7.5-amp linear voltage regulator

Voltage input - 6- to 10-volts (5- to 8-cell NiCd/ NiMH or 2-cell LiPo)

Output Voltage - 6.0-volts

Continuous current @ 8.4V - 7.5-amps

Peak current - 11-amps

Dimensions WxLxH - 40 x 30 x 30mm 1.57 x 1.18. x 1.18 in (less

mounting tabs)

Weight - 50 g

/ 1.8 oz

Note: Consult your servo manufacturer’s specifications for

maximum allowable voltage.

• Fail-on soft switch prevents radio loss due to switch failure

• Pre-wired with EC3 connectors ready to install with AR9100 PowerSafe

• Heavy-duty 16-gauge power leads

• Cooling fan provides additional current handling capability

• Convenient mounting lugs

• Two can be used with the AR9100 PowerSafe for up to 15-amp continuous

current

• Factory matched voltage output to draw evenly from dual battery systems

Note: When the battery is connected to the regulator, a low-current drain of

less than 1mAh occurs even when the switch is turned off. If storing

the system for any length of time, disconnect the battery(s) from the

regulator to prevent over-discharge.

Note: It is normal for the regulator to become warm during heavy operation.

27900_SPM_VR6007_VoltageRegulator_InstructionManual_2.indd 1 5/12/10 4:50:09 PM

1 2 3 4 5 6 7 8 ... 11 12

Pas de commentaire

Spektrum SPMVR6007 Manuel d'utilisateur Page 3