Spektrum SPMVR6007 Manuel d'utilisateur télécharger pdf (Page 7)

Spektrum VR60075

Included with the system is an optional charge, on/off adaptor lead. Some

modelers may prefer to use this adapter lead instead of the included soft

switch. When plugged into the regulator’s switch port this adapter lead

allows the following:

1. You can charge the battery through the adapter lead.

WARNING: Never overcharge a battery beyond the listed capacity

on the battery label. Overcharging can result in fire, property

damage and personal injury.

2. You can turn the system off by inserting the Bind plug. Removing the

bind plug turns the system on.

3. You can monitor battery voltage through the adapter lead using a flight

log or voltmeter. If the voltmeter is plugged directly into the

male-male extension, the system is active and voltage under load

(system operational) is displayed. If plugged into the charging lead,

the at-rest battery voltage is displayed.

Install the adapter lead as

shown in the following diagram.

Note: A plastic housing is included that allows the lead to be mounted to

the side of the fuselage.

Optional Charge On/Off Adapter Lead

27900_SPM_VR6007_VoltageRegulator_InstructionManual_2.indd 5 5/12/10 4:50:14 PM

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Spektrum SPMVR6007 Manuel d'utilisateur Page 7