Spektrum SPM3130 DX3S Manual Manuel d'utilisateur télécharger pdf (Page 15)

15SPEKTRUM DX3S USER GUIDE

TIMER

The DX3S has three types of timers:

Internal timer - automatically records the time that the

transmitter is turned on.

Down timer – is the default (user selectable) timer type

that can be programmed for up to 60 minutes and 59

seconds in one-second increments. Normally this timer

is programmed for the length of a race and is defaulted to

5:00 minutes for electrics or the duration of the fuel tank

in gas, warning the driver that it’s time to pit. The Down

timer is started by pressing the timer button. When the

down timer expires, an alarm will sound until the timer

button is pressed. To pause or continue the Down timer,

press the timer button once. To reset the Down timer to

its preprogrammed value, press and hold the timer button

for more than 3 seconds.

Up timer - is started by pressing the timer button

and counts up from 00:00 seconds, functioning as a

stopwatch. The Up timer is useful for timing a fuel run to

determine fuel mileage/pit stop strategy or for electrics,

to time the run time of a pack to determine gear ratio and

setup information. To pause or restart the Up timer, press

the timer button. To reset the UP timer to 00:00 press and

hold the timer button for more than 3 seconds.

Either the Up or Down timer can be selected and

displayed.OnthemainscreenitisbelowtheInternal

timer.Onthetelemetryscreenitisbelowthemodel

number.

TO ACCESS THE TIMER FUNCTION

From the list screen rotate the Rolling Selector to

highlight the Timer function.

Press the Rolling Selector to enter the Timer

function. The Timer screen will be displayed as shown

on this page.

Three primary timer functions are available.

Internal Timer Reset

To reset the internal timer- rotate the Rolling Selector and

place the box around “Inte Reset” then press the Rolling

Selector to reset the internal timer to 0:00:00.

Timer Reset

To reset the selectable timer, rotate the Rolling Selector

and place the box around “Timer Reset,” and press the

Rolling Selector.

Type

To select the timer type, rotate the Rolling Selector

and place the box around “Type” and press the Rolling

Selector. The surrounding box will flash. Rotate the

Rolling Selector to select the (Up or Down) timer type

then press the Rolling Selector to select.

With the down timer enabled, two additional parameters

(not found in the Up timer) are available:

Alarm: To turn the alarm on or off, rotate the Rolling

Selector and place the box around “Alarm” and press the

Rolling Selector. The surrounding box will flash. Rotate

the Rolling Selector to select then press the Rolling

Selector.

Reset Value: To select the duration of the Down timer,

rotate the Rolling Selector and place the underscored line

beneaththeminuteorseconddigitstoadjustandpress

the Rolling Selector. The line should now flash. Rotate

the Rolling Selector to select the reset time value and

press the Rolling Selector to select.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 29 30

Commentaires sur ces manuels

Pas de commentaire

Spektrum SPM3130 DX3S Manual Manuel d'utilisateur Page 15

Commentaires sur ces manuels

Produits connexes et manuels pour Panneau de contrôle Spektrum SPM3130 DX3S Manual