Spektrum SPM3130 DX3S Manual Manuel d'utilisateur télécharger pdf (Page 24)

24 SPEKTRUM DX3S USER GUIDE

• Installthemountundertheenginescrewandadjust

the sensor so it is 1/8” from the flywheel. Depending

on your flywheel size, the sensor might have to be

mounted in different orientations.

• Iftheflywheelisreflective(baremetal),placeaflat

black decal on the flywheel so it passes between the

sensor and the flywheel when rotated. If the flywheel

is non-reflective, place a reflective decal on the

flywheel so that it passes between the sensor and the

flywheel when rotated.

Hint: We recommend applying a small

amount of CA glue around the edges of the

decal to ensure strong adhesion. Be sure to

only glue the edges and do not cover the top

of the decal.

• PlugthesensorintotheRPMportinSR3300T

receiver.

RPM/SPEED SENSOR (ELECTRIC)

In electric cars and trucks, the rpm sensor is mounted

near the spur gear and gets rpm readings directly

from that gear. A conversion in the transmitter can be

programmed to give speed in mph or rpm. See the

Telemetry Speed Unit section on rpm and speed for

more details. A mount is provided that allows the rpm

sensor to be conveniently mounted in many applications.

Because of the diverse types of electric vehicles, it may

be necessary to fabricate a mount from Lexan for some

types of vehicles.

RPM/Speed Sensor Installation (Electric)

• Determinethebestmethodtomountthesensornear

the spur gear. The face of the sensor must face the

side of the gear. A mount is provided that can be

taped in place using servo tape then bent to allow

installation in most applications.

• Mounttherpmsensorsuchthatthesensoris1/8”

from the side of the gear.

• Ifthegearisnon-reflective,placeareflectivedecal

on the gear so it passes between the sensor and the

flywheel when rotated. If the gear is reflective, place

a flat black decal on the gear so it passes between

the sensor and the gear when rotated.

• PlugthesensorintotheRPMportintheSR3300T

receiver.

TEMPERATURE SENSOR (NITRO)

A temperature sensor loop is provided in the nitro system

that wraps around the head of the engine to monitor

head temperature. This is useful in tuning engines and in

preventing damaging over-lean runs.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30

Commentaires sur ces manuels

Pas de commentaire

Spektrum SPM3130 DX3S Manual Manuel d'utilisateur Page 24

Commentaires sur ces manuels

Produits connexes et manuels pour Panneau de contrôle Spektrum SPM3130 DX3S Manual