Spektrum DX3S Guide de l'utilisateur télécharger pdf (Page 16)

16 SPEKTRUM DX3S USER GUIDE

BIND

Binding is the process of teaching the receiver the

specific transmitter’s code called GUID (Globally Unique

Identifier) and storing failsafe values. When a receiver is

bound to a transmitter/ model memory, the receiver will

only respond to that specific transmitter/ model memory

(see ModelMatch below).

Note: If a receiver is not bound to a specific

model memory it will not operate.

MODELMATCH

The DX3S features patented ModelMatch technology

that prevents operating a model using the wrong model

memory. During the binding process, the receiver

stores code that is assigned to the specific model that

is currently selected in the transmitter. For example: if

the model that is selected in the transmitter is model #3,

when a receiver is bound to that transmitter, the receiver

will only operate when model #3 is selected. If another

model memory is selected (model #5 for example) the

receiver will not connect. If model three is again selected

in the transmitter, the receiver bound to model #3 will

connect. ModelMatch prevents operating a model using

the wrong model memory.

BINDING A RECEIVER

1. With the receiver off insert the bind plug into the

BIND/RS port (SR3300T) or the BIND port (SR300)

on the receiver.

2. Power the receiver through any port that is not

a 3.3V telemetry port. The amber LED will flash

continuously, indicating the receiver is in bind mode.

WARNING: Do not power the SR3300T

through the LAP, TEMP, or RPM Port. The

receiver will be damaged!

3. Turn on the transmitter and make sure the transmitter

is in the desired model number you intend to use.

4. Press the Rolling Selector to access the List screen.

5. Rotate the Rolling Selector to highlight the Bind

screen and press the Rolling Selector to access

this screen.

6. Rotate the Rolling Selector to highlight BIND.

Bind Plug

LED

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Pas de commentaire

Spektrum DX3S Guide de l'utilisateur Page 16