Spektrum DX3S Guide de l'utilisateur télécharger pdf (Page 19)

19SPEKTRUM DX3S USER GUIDE

Use the Rolling Selector to select the F/R function.

Pressing the Rolling Selector will cause the surrounding

box to flash. Move the Rolling Selector to enable the F/R

function then press the Rolling Selector to select it. The

screen below will be displayed.

F/R Enabled= (Forward/Reverse) 2-position switch

enabled

TrFH = Travel Forward High side

TrFL = Travel Forward Low side

TrRH= Travel Reverse High side

TrRL= Travel Reverse Low side

Rotate the Rolling Selector and select the Travel Forward

High/Low percentages or the Travel Reverse High/

Low percentages. Press the Rolling Selector and the

surrounding box will cause the box to flash. Rotating

theRollingSelectorwillnowadjustboththeTravelHigh

and Travel Low values simultaneously. If you desire to

adjustthehighorlowtravelvaluesindependently,move

the wheel and that value alone will be highlighted (e.g.

turning the steering wheel to the right will highlight the

lowvalueonlyandsubsequentadjustmentwillaffectthe

right travel only). To highlight both values again after

moving the wheel in one direction, simply press the

Rolling Selector twice with the wheel centered and both

values will be highlighted.

To return to the main screen press and hold the Rolling

Selector for more than three seconds.

TELEMETRY SETTINGS

The Telemetry setting function is used to select a default

screen for display including Main, Telemetry or Roll. It is

also used to access the Telemetry SPEED, BATTERY and

TEMPERATURE sensor settings.

TO ACCESS THE TELEMETRY

SETTING FUNCTION

In the List screen use the Rolling Selector to highlight

Tele Setting then press the Rolling Selector.

The TELE SET screen will appear.

To select the default screen, rotate the Rolling Selector to

place the box around Screen: TELE then press the Rolling

Selector. The surrounding box will flash.

• TELEdisplaystheTelemetryscreen.

• MAINalwayshidestheTelemetryscreen.

• ROLLallowstherollertoselectbetweenthe

Telemetry and Main screens.

Rotate the Rolling Selector and choose your desired

default screen. (TELE displays the Telemetry screen.

ROLLwillallowtheRollingSelectortoselectbetweenthe

Telemetry and Main Screens.) Press the Rolling Selector

to select.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Spektrum DX3S Guide de l'utilisateur Page 19

Commentaires sur ces manuels