Spektrum DX18 Manuel d'instructions télécharger pdf (Page 32)

32 SPEKTRUM DX18 • TRANSMITTER INSTRUCTION MANUAL

Monitor

The Monitor screen displays the servo positions for each channel

graphically and numerically. This is useful to verify programming

functions, trim settings, mix directions, etc. The numeric value is

directly relative to the travel adjust and mix values (e.g., 100%

travel adjust equals 100% value in the Monitor).

X-Plus Monitor

Use of the X-Plus Monitor requires X-Plus to be active. The X-Plus

Monitor screen displays the output position for each X-Plus chan-

nel graphically and numerically. This is useful to verify program-

ming functions, trim settings, mix directions, etc. The numeric

value is directly relative to the travel adjust and mix values (e.g.,

100% travel adjust equals 100% value in the X-Plus Monitor). The

X-Plus Monitor shows the additional channels and requires servos

which can be connected to the optional X-Plus module and an

X-Plus-capable receiver. X+1 and X+2 channels also serve as the

monitor for channels 11 and 12 on a 12 channel receiver.

CAUTION: Do NOT connect throttle or any primary

control sur face to the X-Plus Module.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 46 47

Pas de commentaire

Spektrum DX18 Manuel d'instructions Page 32