Spektrum DX18 Manuel d'instructions télécharger pdf (Page 38)

38 SPEKTRUM DX18 • TRANSMITTER INSTRUCTION MANUAL

SAIL (SAILPLANE)

Use the Sailplane Type Screen to select wing and tail types to

match your sailplane model. Diagrams and setup names show on

the transmitter screen to show the available setups.

Refer to community.spektrumrc.com for more information about

new DX18 AirWare updates to support these options.

* Selection of multiple ailerons activates the Differential menu

option.

** Selection of either of these activates the V-Tail Differential menu

option.

Camber Preset

Camber Preset is only available when 2 or 4 aileron wing type is

selected in Sailplane Type. The Camber Preset function enables

you to program the ailerons,  aps, wing tips and elevator for a

speci c position in each Flight Mode.

If  ight modes are not active, only one preset position is available

and it is always active.

The Camber Preset Speed enables the control surfaces to

transition over a period of time, up to 30 seconds, when you

change  ight modes.

Move the  ight mode switch to the desired position to change the

Camber Preset values.

Camber System

Camber System is only available when 2 or 4 aileron wing type

is selected in Sailplane Type. The Camber System allows in- ight

camber adjustment and is also used as the braking system, often

referred to as Crow or Butter y. The Camber System enables you

to assign the Camber System to a different switch in each  ight

mode.

Wing

• 1 Servo

• 2 Aileron*

• 2 Aileron 1 Flap*

• 2 Aileron 2 Flap*

• 4 Aileron 2 Flap*

Tail

• Normal

• V-Tail A**

• V-Tail B**

Motor

• Inhibit

• Assign to a Switch (optional)

Image Selection

Press NEXT to select the sailplane image. Highlight and select the

image on screen, then use the roller to select the image desired.

Press the roller to select.

Sailplane Type

NOTICE: Refer to your sailplane manual for recommended control throws.

CAUTION: Always do a Control Test of your model with the transmitter after programming to make sure your model

responds as desired.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 46 47

Commentaires sur ces manuels

Pas de commentaire

Spektrum DX18 Manuel d'instructions Page 38

Commentaires sur ces manuels

Produits connexes et manuels pour Télécommandes Spektrum DX18